support Site Admin
Joined: 20 Mar 2008 Posts: 3748
|
Posted: Thu Dec 29, 2011 6:38 pm Post subject: Hidrex PSP1000 Help |
|
|
Hidrex PSP1000 help
You just have to keep the hands feet or armpit pads out until you´ve run the whole setup thru (chosen pulse rate, mode time and strength, or let the Hidrex do this job to setup the latest settings automatically. In this case, switch on the machine and wait 8 seconds - until time and voltage comes up, then you can place the hands e.g. and the device will start the therapy.
As long as you have the current circle closed after switching on the device, it will not let you in the setup mode, in the beginning there is a security checkup, this takes some seconds...
Quote: | Hello!
I borrowed a Hidrex PSP1000 to try out from my hospital but there seem to be a problem with it and the hospital told me to contact you. When I set it up as in the manual and then switch it on it never goes into Setup. It just keep showing the three moving bars and the Dive light is on. What should I do to get into Setup and is it possible that there is something wrong with the unit?.
I appreciate all the help I can get.
Sincerely |
_________________ You are welcome...
Support Staff
Rental plan for iontophoresis
Buy your own home therapy iontophoresis device!
You can reach us from 9am to 5pm !Board time!
mail: info-at-iontophoresisdevice.com
Iontophoresis: WE CARE! |
|