Forum for Excessive Sweating and Hyperhidrosis
Imprint

iontodevice.com
Iontophoresis vs. Hyperhidrosis

Buy an iontophoresis device

 Log inLog in SearchSearch

Forum for Iontophoresis Hyperhidrosis and excessive sweating

RegisterRegister  
 

If one machine does not work for you?

 
Post new topic   Reply to topic    Hyperhidrosis Forum -> Iontophoresis
Author Message
Tai-pan



Joined: 23 May 2020
Posts: 5

PostPosted: Sat Jun 27, 2020 2:29 pm    Post subject: If one machine does not work for you? Reply with quote

Hi

Could someone please answer this for me, 'If one machine doesn't work for you is it worth trying another?'
I have used the Hidrex 1000 and the first year I used it it worked fantastically, I was over the moon! However, I've tried it several times since and it no longer works for me, I'm gutted. I have not moved, the water supply has not changed, I've tried Volvic water etc and followed numerous other suggestions, but nothing! It no longer works for me.
Should I buy a different make of machine, would this make any difference, or once iontophoresis stops working it STOPS WORKING!
Back to top
View user's profile Send private message
support
Site Admin


Joined: 20 Mar 2008
Posts: 3675

PostPosted: Mon Jun 29, 2020 12:10 pm    Post subject: Reply with quote

Good morning, can you tell us how often you conduct the treatments and at which current strength?
_________________
You are welcome...
Support Staff

Installment Plans for iontophoresis

Buy your own home therapy iontophoresis device!

You can reach us from 9am to 5pm !Board time!
mail: info-at-iontophoresisdevice.com

Iontophoresis: WE CARE!
Back to top
View user's profile Send private message Visit poster's website
Guest






PostPosted: Mon Jun 29, 2020 2:09 pm    Post subject: Reply with quote

Well, first of all, I tried what worked the year before, which was 15 mins on 90 pulse then re-soak the pads and switch polarity and do another 15 mins. But unfortunately, it did not work this time around. I then tried other pulse settings but not going lower than 70. I increased the time to 10 mins each armpit and only switching polarity after 5 sessions, I have used Volvic water and have used bicarb and soda water! Nothing ever made a difference.
I'm going to giving Odaban another go, it may be really uncomfortable and makes me itch like made but at least it works.
Back to top
Guest






PostPosted: Mon Jun 29, 2020 2:14 pm    Post subject: Reply with quote

Please send us the Volt settings..
Back to top
Guest






PostPosted: Tue Jun 30, 2020 2:20 pm    Post subject: Reply with quote

It is usually around 27v but sometimes the machine lets me run it at around 35, though, I realise this setting is too high for my skin, as I have burnt myself a few times. So, even if the machine will let me do 35v I crank it down a little to about 30-32.
I hope this helps. I'm kinda thinking if I have done exactly the same as the year before and it's not working...then it's not going to work! I have read about this happening to others as well. It is very unfortunate.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Excessive Sweating Forum -> Iontophoresis All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Users Memberlist