Forum for Iontophoresis Hyperhidrosis and excessive sweating

Dear Olga

This is normal, the power button is just to start the therapy after setting up the current, it is not to switch out the only way to switch it out is to unplugged the device

When having success with normal tap water - Don’t add anything to it
this may impact - or in baddest case - prevent a possible success or existing sweat free effect

Through the fact the skin is ...

My dear

pls tell me: is it only the sensation or has it had a bad impact to your skin?

Dear
Shipping is included in the prices,

You will get back €409 when you want to give it back, but, believe me as good as no one does this, cause the machine is really cool..

simply google & ...

If you dont feel the current and the same does not go to its maximum, please read through our troubleshooting if you google it you will find it, that is listed the useful information how to do

Some ...

As long you feel the current electrodes are ok

Check this
https://www.iontodevice.com/hyperhidrosis/introduction-to-iontophoresis-initial-treatment-t326.html

And that

https://www.iontodevi ...

Just buy and you get the documents with the invoice. These infos are written by default on our invoices.

Thank you so much for sharing your experience, this tends for you that changing iontophoresis polarity is the wrong way for you.
That you experience long times of dryness, is nothing new, and some of ...

The ConceptION is not ready to sell at the moment - it is tin test mode and we review the clinic tests at the moment.

We don´t know when it comes to our shops.

I wouldn´t make up my mind for ...

It is the same for both ... ComfortION is the newest device from Hidrex

here you find optimizing hints

https://www.iontodevice.com/hyperhidrosis/iontophoresis-optimization-t2243.html

sure y ...

Just saw you wrote a mail - i respond there..

We can’t look into the future, so there is no estimation of the cost, but the minimum of 120 for doing necessary things for suiting European medical laws, if any manufacturer opens the device, there ...

Then something is wrong with the machine..

Here is an idea to treat with metal parts

https://www.iontodevice.com/hyperhidrosis/iontophoresis-with-metal-parts-or-implants-t963.html

We are not a clinic
And sure you can rent / buy a device without doctors prescription

Hi Sego

We only rent the connection with classic this is not possible, sorry

you could buy the classic - for you it is a bit cheaper than the connect

this is why it is tip top for al other ...

Please retry

does it tingle (iontophoresis current) at 25? Pls write a pm - then i respond there - seemsto be a bit more complicated than other cases

Sorry, no nit at all

You can stop ionto gof ; months snd see ic ih is not only simple

Doing too much
Or you are getting older

Nothing lasts forever.. axl rose

It cannot be the power supply, also the main unit must not replaced.
Sometimes you need to do more treatments, please google: “optimizing iontophoresis”
You will find our new pages with suggesti ...

As long it isn’t in the area of the current flow: nope

Dear Moni, the hand treatment should not be affected, since the implant is not directly in the current flow. If you were to treat your face, that's a different story.
If you're unsure, you can consu ...

take a look here:

https://www.iontodevice.com/hyperhidrosis/hidrex-connection-app-t2170.html

yes this is maybe an idea - here we have some more optimization tips and hints...

https://www.iontodevice.com/hyperhidrosis/iontophoresis-optimization-t2243.html

the machine does not switch on every time?

look at this

https://www.iontodevice.com/hyperhidrosis/device-doesnt-start-stays-at-0-ma-reaches-not-25-ma-max-t29.html

Dermadry is a popular brand simply click https://www.google.com/search?client=firefox-b-d&q=bindner+medical+dermadry

Or google „bindner medical dermadry“ to maybe get the best prices and op ...

Good morning, we have answered your questions via email Smile

Does shr still feel the current?

There is no advantage in treatment
The water spread is better for the towels
Only that they dry better

Thanks so much for the Update

Then the best would be to order a new one

Did you get the machine from us? Please send me a picture of the electrodes Smile

Pls clean everything thoroughly, electrodes trays, grids
Maybe you developed a contact allergy? What material do you use for electrodes?

Or maybe cables/electrodes in rare cases
There is a troubleshooting routine in the internal board

Do you feel the current still? Have you moved?

https://www.iontodevice.com/hyperhidrosis/sweating-again-please-help-t2120.html

You're so welcome Smile

Any updates?

Thank you for your feedback!

You're welcome! Let us know how it goes Smile

Pls retry

The device measures the body resistance, therefore it will only reach the maximum output that is allowed by the user's body resistance!

You get a shipping confirmation and track number in some minutes via mail

This is aluminium, yes time to get new plates, choose steel and they last min 15 years

then try warm water - and you see the mA will have a better relation to the Volts

in the end if you think about the picture - mA the strenght and volt the pressure - then it is a better feeling to ...

Team Leader Admin Notice

The mA is adjusted in the background along the Voltage
It matters if the Voltage is high no matter in first front to the mA driven.
Then on second sight it is very intere ...

Dear Constantina, what pulse width do you use? You're right that we advise our customers to use the voltage rather than the mA control because it is more precise. The efficiency isn't affected, you ju ...

Never heard of anything like that.

So are we! Cool

When done correctly, iontophoresis can be an immensely efficient therapy Smile

You mean the CL protection? This is a sign of a high body resistant

https://www.iontodevice.com/hyperhidrosis/device-voltage-does-not-reach-the-desired-setting-t316.html

yes it is - depending on your location

You can couple it with Bluetooth to smartphones and have all parameters adjustalbe at one view for deepen iontophoresis inview.. body resistant ok or not? Current and power brought into the skin, auto ...

We could offer you the new ConnectION from Hidrex ... same but different Wink

It has some + Features that the PSP1000 havent got

Really no good idea to do so...

Hi, I'm supposing you mean the electrodes? There are stainless Steel electrodes available also.
You can slso choose silicon / grafite electrodes.
We recommend stainless steel as best of our choices. ...

Glad to hear from you, you can send us the clinic and doctor's name privately if you like Smile

Thank you so much for telling us about your experience.

Many thanks for your testimonial about the Hidrex PSP 1000

We had this discussion years back and there some worrywarts made a big problem about this and wanted to check if there is a heavy metal poisoning - with no results.

Sometimes there are spots from t ...

Never treat without grids or towels.
You didn’t spoil the machine.

It is contraindicated for pregnancy -and also breastfeeding- like all things who have to do with currents - how tiny they ate.. there is no clinical evidence for this, but it may stress you baby. what ...

Good morning, can you tell us how often you conduct the treatments and at which current strength?

Pls retry

Pulse width seems a bit high
https://www.iontodevice.com/hyperhidrosis/how-to-adjust-the-perfect-pulsed-setting-for-hidrex-psp1000-t748.html
Pls try volvic water for 3 weeks then get back

Hi Soso,
You should not feel any pain during the treatment! It's possible that your body built a higher resistance to the current. As long as the iontophoresis treatments are still efficient, then i ...

This would mean you order and send us the money to our accounts, then -after he receive- the items leave

i sent you a pm

Too early to say anything.. latest day 20 should bring something
If not pls reply again

Thank you!

That's what iontophoresis does, thank you for your feedback Cool

you are welcome

Hi Olga, try the following:

If you still have the aluminium electrodes, conduct the treatment with them instead of the stainless steel electrodes.

Also, please disinfect the tubs, grids, elect ...

Hi Olga, do you experience any allergies to metal? If yes, the stainless steel electrodes could be the problem. Try pouring less water into the tubs too. It’s possible that the current is a bit too ...

i woudl say retry, the link surly works

No, but default settings are mentioned in the manual
This makes little sense for me, so pls take a look to:
https://www.iontodevice.com/hyperhidrosis/how-to-adjust-the-perfect-pulsed-setting-for-hid ...

Only when they sweat completely, else lower water is better.. just Check out

Normally it takes 10-15 days daily treatment till you see results
https://www.iontodevice.com/hyperhidrosis/how-high-shall-i-fill-in-the-water-in-the-trays-t145.html

https://www.iontodevice.com/hyperhidrosis/no-limited-success-after-3-weeks-as-stated-in-the-manual-t81.html

Please take a look here
https://www.iontodevice.com/hyperhidrosis/how-high-shall-i-fill-in-the-water-in-the-trays-t145.html
and here:
https://www.iontodevice.com/hyperhidrosis/how-to-adjust-the-per ...

it is only tap water and iontophoresis current

then i would say - maybe the device or the setup or both are responsible for such a long treatment times, our customers have to do mostly only 15-30 Minutes a week (1 or 2 treatments)

yeah i know, but also for one side, or not? So when in the end doing iontophoresis it would be better to do it as first trial i would say

ok, normally all do both sides

sure you could do like this - so ETS has not have an effect on the sweaty hand? Is tere any CS?

Maybe a proper cleaning of the electrodes?

https://www.iontodevice.com/hyperhidrosis/cleaning-and-care-spare-parts-t51.html

Maybe also a switch in the Pulse width down to 50%?

https://www.ion ...

The app is now available under

https://www.iontophorese.de/download/HIPRO10.HIPRO10_V2.3.apk

the installation guide you can find here:

https://www.iontophorese.de/download/PI_HIPRO_2061-Anlei ...

No there is no obvious effect to the success of iontophoresis concerning alu and stainless

the comment section in the orders Pops up a order is made and has to be check removed manually, else the order will not go out

so you never got a success in this time? Or on and off?

Maybe worth thinking about buying new ones

Hi Zach, anything fatty is particularly likely to interfere with the current flow and should not be applied before treatment. The important thing is only to moisturise after the treatment. Smile

No, we haven’t the possibility to research something like this. We know what works till today and this is our current care..

You have to test it
Our Current Care is up to date without any effect on iontophoresis

You are welcome

I will send you a pm

This is really not necessary.
Go ahead as long it works, the iontophoresis device you have is one of the best in the world.

Hey, that's so great to hear! Very Happy

Very good to hear that the Idromed device has helped you to stop sweating completely!! Many thanks for your story! Cool

Many thanks for your story, we are glad to hear about your success with iontophoresis.

One thing in front: the cable of the plug is looking good? No flexed or broken?
If it is a problem with the machine itself within 2years warranty you don’t have to pay anything

https://www.iontodevice.com/hyperhidrosis/how-high-shall-i-fill-in-the-water-in-the-trays-t145.html

I also sent you a message with hints

Author	Message
Topic: Dermadry Total Set issue
support Replies: 1 Views: 29	Forum: Iontophoresis Posted: Wed May 06, 2026 1:44 pm Subject: Dermadry Total Set issue
support Replies: 1 Views: 29	Dear Olga This is normal, the power button is just to start the therapy after setting up the current, it is not to switch out the only way to switch it out is to unplugged the device
Topic: Dermadry for iontophoresis on hands
support Replies: 3 Views: 24	Forum: Iontophoresis Posted: Wed May 06, 2026 8:41 am Subject: Dermadry for iontophoresis on hands
support Replies: 3 Views: 24	When having success with normal tap water - Don’t add anything to it this may impact - or in baddest case - prevent a possible success or existing sweat free effect Through the fact the skin is ...
Topic: Dermadry for iontophoresis on hands
support Replies: 3 Views: 24	Forum: Iontophoresis Posted: Wed May 06, 2026 8:16 am Subject: Dermadry for iontophoresis on hands
support Replies: 3 Views: 24	My dear pls tell me: is it only the sensation or has it had a bad impact to your skin?
Topic: Dermadry iontophoresis
support Replies: 1 Views: 62	Forum: Iontophoresis Posted: Sun Apr 19, 2026 11:43 am Subject: Dermadry iontophoresis
support Replies: 1 Views: 62	Dear Shipping is included in the prices, You will get back €409 when you want to give it back, but, believe me as good as no one does this, cause the machine is really cool.. simply google & ...
Topic: Idromed - sweating starts again after 15 years treatment
support Replies: 3 Views: 91	Forum: Iontophoresis Posted: Sat Apr 18, 2026 8:56 pm Subject: Idromed - sweating starts again after 15 years treatment
support Replies: 3 Views: 91	If you dont feel the current and the same does not go to its maximum, please read through our troubleshooting if you google it you will find it, that is listed the useful information how to do Some ...
Topic: Idromed - sweating starts again after 15 years treatment
support Replies: 3 Views: 91	Forum: Iontophoresis Posted: Sat Apr 18, 2026 8:50 pm Subject: Idromed - sweating starts again after 15 years treatment
support Replies: 3 Views: 91	As long you feel the current electrodes are ok Check this https://www.iontodevice.com/hyperhidrosis/introduction-to-iontophoresis-initial-treatment-t326.html And that https://www.iontodevi ...
Topic: Comfortion quote
support Replies: 1 Views: 99	Forum: General obscurities Posted: Tue Apr 14, 2026 5:16 pm Subject: Comfortion quote
support Replies: 1 Views: 99	Just buy and you get the documents with the invoice. These infos are written by default on our invoices.
Topic: My success story :)
support Replies: 3 Views: 10123	Forum: Success board Posted: Sat Apr 04, 2026 11:38 am Subject: My success story :)
support Replies: 3 Views: 10123	Thank you so much for sharing your experience, this tends for you that changing iontophoresis polarity is the wrong way for you. That you experience long times of dryness, is nothing new, and some of ...
Topic: ConnectION - ComfortION or ConceptION
support Replies: 1 Views: 113	Forum: Iontophoresis Posted: Sat Mar 28, 2026 10:28 am Subject: Hidrex ConnectION / ComfortION
support Replies: 1 Views: 113	The ConceptION is not ready to sell at the moment - it is tin test mode and we review the clinic tests at the moment. We don´t know when it comes to our shops. I wouldn´t make up my mind for ...
Topic: Hidrex ComfortION / ConnectION
support Replies: 1 Views: 197	Forum: Iontophoresis Posted: Tue Feb 10, 2026 7:40 pm Subject: Hidrex ComfortION / ConnectION
support Replies: 1 Views: 197	It is the same for both ... ComfortION is the newest device from Hidrex here you find optimizing hints https://www.iontodevice.com/hyperhidrosis/iontophoresis-optimization-t2243.html sure y ...
Topic: Aam iontophoresis
support Replies: 1 Views: 636	Forum: General obscurities Posted: Sun Oct 12, 2025 5:25 pm Subject: Aam iontophoresis
support Replies: 1 Views: 636	Just saw you wrote a mail - i respond there..
Topic: psp1000 wont turn on
support Replies: 5 Views: 1517	Forum: General obscurities Posted: Wed Sep 24, 2025 11:46 am Subject: psp1000 wont turn on
support Replies: 5 Views: 1517	We can’t look into the future, so there is no estimation of the cost, but the minimum of 120 for doing necessary things for suiting European medical laws, if any manufacturer opens the device, there ...
Topic: psp1000 wont turn on
support Replies: 5 Views: 1517	Forum: General obscurities Posted: Wed Sep 24, 2025 8:47 am Subject: psp1000 wont turn on
support Replies: 5 Views: 1517	Then something is wrong with the machine..
Topic: Iontophoresis and IUD