Forum for Iontophoresis Hyperhidrosis and excessive sweating

When i connect cables like on a picture current goes to 07V??

Hi does anyone have better results using low voltage/amperage instead of going as high as possible? I mean very low values like 10 amps? Someone told me he couldn't reach success despite going as high ...

Overtreatment is not the case as my skin is in a good condition overall it's just like I am getting used to treatment and they slowly stop working?

Just a question as I came back to daily treatments of 30 minutes and I can feel day by day my hands are getting clammy and moist. They used to be dry but now I am loosing it. Why is that happening?

And if that means I will not be able to go with longer brake. Also if I use machine at highest possible setting does this mean in future it will stop working as my body will adapt?

Thanks I mean I treat every other day but noticed my fingertips get moist so I am afraid I will lose ionto effect soon?

Hi is it normal that during maintenance fingertips get little sweaty or I should be 100% sweat free?

Hi I will be trying to sell back my device if there is anyone who would like to buy it of me let us know please. As I don't think I apply for money back no more.

Ok I was expecting to stop sweating today but unfortunately I had another treatment and my hand still sweat more then ever I am fed up with it do you recommend I should keep up with treatments or stop ...

I increased treatment time to 45 minutes 40V as that's max I could get out machine. I noticed now since two days my hands sweat like never before.... It's really bad like a tap haha but at least some ...

Thanks for reply Ill just add I could reach 55v few days ago. I will follow advice and will treat longer.

Ok so even that I could only reach about 40V dc I noticed today morning my hands would sweat less but later they started to sweat again and now after another treatment I can feel they sweat less... Is ...

I have tried very warm water with bicarbonate soda and voltage was lower than ever it reached only 33v it's strange.

Yes I can feel current. I will follow your advice and let know. It is strange that I would need that high current. So what happens when someone needs more then 60v to be dry? Is the treatment going to ...

I got hidrex because I thought it will work faster and will be stronger but when I treat the voltage goes down with a treatment time. Battery run device goes opposite its Increasing current.

By the way, why some people get success at 15v other don't at 40v? I thought human skin is a human skin so everyone should succeed. I also wonder why when used battery run device I could get dry in tw ...

To be honest I think this safety feature is a big disadvantage of hidrex as it doesn't allow you to treat as high as you want. I'm sure it affects therapy in a bad way.

Ok guys it's an update from me. I kept daily treatments for I don't even remember how long. My skin was in a very bad condition and treatment became so painfull that I had to stop. And what happened w ...

I will i also noticed left hand is bit behind i expect is becouse you said red electrode is stroger and i used it on right hand. Anyway things are on a right track its just a shame it takes so long Smile

...

Hi i made few more treatments using direct current and my hands are dryer then before i think with more treatments ill gain succes. The question is can i change treatments to p90 as my skin on left ha ...

Sometimes it actually feels like yes machine its working but after a while you grab a phone or hold something and sweat comes back big time.

Lets say my hands are dryer sometimes and i do treatment but they only dry for a while for example in a morning. Level of sweat varies during a day. Thats why i am forced to do every treatment on a di ...

Hi if one day i can treat on 55V and next day machine only allowes me to use 36V does it affect my success?

Yes maybe i am. I know how tricky this could be hah. I hope one day i will write you a nice succes post hah. Thanks.

What happens now is that skin is dry for some time then it becomes extremely sweaty then sometimes its just clammy it changes often during a day. its very strange. In past i would experience a lot of ...

P90 looked like it didnt work for me with p100 i dont feel pain but i am able to reach high voltage. I did have a succes with direct current before as well but as i mentioned before it was a battery r ...

Ok so i went to use p100 mode and i was able to treat using 55V. I did few 24 minute long treatments and my skin was sweat free for one day but next day sweat came back. At the moment the only dry are ...

Ok thanks i will follow Your advice as from my experience in past its a matter of time and patience and i hope i will get succes with Hidrex Smile

Yes it was 27mA as i used battery run device and it only showes mA. Yhen yes i stopped as i was advised to start treatment as soon as sweat comes back.

So i followed this plan and i was still sweating when finished it so on the end after two days i did two top up treatments using 27mA and then sweating just stopped and i was bone dry for more then we ...

I used the device at 10 mA for 10 minutes for each polarity, if everything is alright (according to feeling) increase the strength of the therapy the next day to 12 mA for 12 minutes for each polarity ...

HIDREX PSP1000
Hands only
P90
--------
For every treated area we need to know:

- Initial Treatment was done every day?
Yes
- You feel the current as a slight tingling sensation?
Yes
- For ...

My settings are p 90 always as high as possible with a voltage but machine never goes high enough i mean usually 36 volts its max. When you change to mA its not much about 21mA.

Hi. I have used a battery run device in a past and i could use it for two weeks then after one or two days of heavy sweating my hands would become bone dry for about one week. I used 24 minutes of tre ...

Hi did You receive device?

Hi i will have to wait with my success post as i am still trying my best to work out a perfect plan. I have periods of time when i am bone dry and i feel great but then sweat comes back and i have to ...

Hi i got a parcel with an unit. I checked it and they both same so looks like there was nothing wrong with it. I will send the unit back to You on friday if you dont mind as im working. I would like t ...

Thank You very much and when i get it i will send You the one I have yes?

I will definetly take a device as i am sure it works and i have done iontophoresis before (i have another machine). Just the issue with a buttons makes me think You should have a look at it. If You wi ...

Thanks I sent You pm

Hi thanks for a quick response. When i am adjusting volts i click once + or - then it goes up or down. Sometimes only when i press button nothing happens. For example: click 40V click 41V click 42V cl ...

I am using Hidrex psp1000.

Hi all i have question about buttons on a device. Sometimes when i press them to adjust voltage or time it doesnt work. It takes another click to make it work. Is it a common thing or i have faulty de ...

Author	Message
Topic: Hidrex troubleshooting
Substancy Replies: 6 Views: 20076	Forum: Hidrex GS400, PS500 and PSP1000 section Posted: Fri Oct 20, 2017 1:17 am Subject: Hidrex troubleshooting
Substancy Replies: 6 Views: 20076	When i connect cables like on a picture current goes to 07V??
Topic: Low voltage/ampreage might be helpfull
Substancy Replies: 1 Views: 11055	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Sep 29, 2017 7:20 pm Subject: Low voltage/ampreage might be helpfull
Substancy Replies: 1 Views: 11055	Hi does anyone have better results using low voltage/amperage instead of going as high as possible? I mean very low values like 10 amps? Someone told me he couldn't reach success despite going as high ...
Topic: Maintenance sweat
Substancy Replies: 7 Views: 29909	Forum: Problems with the treatment - No / only little / partial success board Posted: Tue Sep 26, 2017 7:57 am Subject: Maintenance sweat
Substancy Replies: 7 Views: 29909	Overtreatment is not the case as my skin is in a good condition overall it's just like I am getting used to treatment and they slowly stop working?
Topic: Maintenance sweat
Substancy Replies: 7 Views: 29909	Forum: Problems with the treatment - No / only little / partial success board Posted: Tue Sep 26, 2017 7:55 am Subject: Maintenance sweat
Substancy Replies: 7 Views: 29909	Just a question as I came back to daily treatments of 30 minutes and I can feel day by day my hands are getting clammy and moist. They used to be dry but now I am loosing it. Why is that happening?
Topic: Maintenance sweat
Substancy Replies: 7 Views: 29909	Forum: Problems with the treatment - No / only little / partial success board Posted: Thu Sep 21, 2017 8:26 pm Subject: Maintenance sweat
Substancy Replies: 7 Views: 29909	And if that means I will not be able to go with longer brake. Also if I use machine at highest possible setting does this mean in future it will stop working as my body will adapt?
Topic: Maintenance sweat
Substancy Replies: 7 Views: 29909	Forum: Problems with the treatment - No / only little / partial success board Posted: Thu Sep 21, 2017 8:24 pm Subject: Maintenance sweat
Substancy Replies: 7 Views: 29909	Thanks I mean I treat every other day but noticed my fingertips get moist so I am afraid I will lose ionto effect soon?
Topic: Maintenance sweat
Substancy Replies: 7 Views: 29909	Forum: Problems with the treatment - No / only little / partial success board Posted: Thu Sep 21, 2017 8:02 pm Subject: Maintenance sweat
Substancy Replies: 7 Views: 29909	Hi is it normal that during maintenance fingertips get little sweaty or I should be 100% sweat free?
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Sep 15, 2017 2:02 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Hi I will be trying to sell back my device if there is anyone who would like to buy it of me let us know please. As I don't think I apply for money back no more.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Tue Sep 05, 2017 12:01 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Ok I was expecting to stop sweating today but unfortunately I had another treatment and my hand still sweat more then ever I am fed up with it do you recommend I should keep up with treatments or stop ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Mon Sep 04, 2017 6:54 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	I increased treatment time to 45 minutes 40V as that's max I could get out machine. I noticed now since two days my hands sweat like never before.... It's really bad like a tap haha but at least some ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Sat Sep 02, 2017 2:40 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Thanks for reply Ill just add I could reach 55v few days ago. I will follow advice and will treat longer.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Sat Sep 02, 2017 1:25 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Ok so even that I could only reach about 40V dc I noticed today morning my hands would sweat less but later they started to sweat again and now after another treatment I can feel they sweat less... Is ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Sep 01, 2017 1:46 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	I have tried very warm water with bicarbonate soda and voltage was lower than ever it reached only 33v it's strange.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Sep 01, 2017 12:48 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Yes I can feel current. I will follow your advice and let know. It is strange that I would need that high current. So what happens when someone needs more then 60v to be dry? Is the treatment going to ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Sep 01, 2017 11:56 am Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	I got hidrex because I thought it will work faster and will be stronger but when I treat the voltage goes down with a treatment time. Battery run device goes opposite its Increasing current.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Sep 01, 2017 11:13 am Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	By the way, why some people get success at 15v other don't at 40v? I thought human skin is a human skin so everyone should succeed. I also wonder why when used battery run device I could get dry in tw ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Sep 01, 2017 8:09 am Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	To be honest I think this safety feature is a big disadvantage of hidrex as it doesn't allow you to treat as high as you want. I'm sure it affects therapy in a bad way.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Sun Aug 20, 2017 4:05 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Ok guys it's an update from me. I kept daily treatments for I don't even remember how long. My skin was in a very bad condition and treatment became so painfull that I had to stop. And what happened w ...
Topic: Current strength
Substancy Replies: 10 Views: 29353	Forum: Hidrex GS400, PS500 and PSP1000 section Posted: Thu Aug 10, 2017 3:56 pm Subject: Current strength
Substancy Replies: 10 Views: 29353	I will i also noticed left hand is bit behind i expect is becouse you said red electrode is stroger and i used it on right hand. Anyway things are on a right track its just a shame it takes so long ...
Topic: Current strength
Substancy Replies: 10 Views: 29353	Forum: Hidrex GS400, PS500 and PSP1000 section Posted: Thu Aug 10, 2017 3:43 pm Subject: Current strength
Substancy Replies: 10 Views: 29353	Hi i made few more treatments using direct current and my hands are dryer then before i think with more treatments ill gain succes. The question is can i change treatments to p90 as my skin on left ha ...
Topic: Current strength
Substancy Replies: 10 Views: 29353	Forum: Hidrex GS400, PS500 and PSP1000 section Posted: Tue Aug 08, 2017 2:59 pm Subject: Current strength
Substancy Replies: 10 Views: 29353	Sometimes it actually feels like yes machine its working but after a while you grab a phone or hold something and sweat comes back big time.
Topic: Current strength
Substancy Replies: 10 Views: 29353	Forum: Hidrex GS400, PS500 and PSP1000 section Posted: Tue Aug 08, 2017 2:57 pm Subject: Current strength
Substancy Replies: 10 Views: 29353	Lets say my hands are dryer sometimes and i do treatment but they only dry for a while for example in a morning. Level of sweat varies during a day. Thats why i am forced to do every treatment on a di ...
Topic: Current strength
Substancy Replies: 10 Views: 29353	Forum: Hidrex GS400, PS500 and PSP1000 section Posted: Tue Aug 08, 2017 12:57 pm Subject: Current strength
Substancy Replies: 10 Views: 29353	Yes
Topic: Current strength
Substancy Replies: 10 Views: 29353	Forum: Hidrex GS400, PS500 and PSP1000 section Posted: Tue Aug 08, 2017 11:45 am Subject: Current strength
Substancy Replies: 10 Views: 29353	Hi if one day i can treat on 55V and next day machine only allowes me to use 36V does it affect my success?
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Mon Aug 07, 2017 4:19 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Yes maybe i am. I know how tricky this could be hah. I hope one day i will write you a nice succes post hah. Thanks.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Mon Aug 07, 2017 4:08 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	What happens now is that skin is dry for some time then it becomes extremely sweaty then sometimes its just clammy it changes often during a day. its very strange. In past i would experience a lot of ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Mon Aug 07, 2017 4:01 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	P90 looked like it didnt work for me with p100 i dont feel pain but i am able to reach high voltage. I did have a succes with direct current before as well but as i mentioned before it was a battery r ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Mon Aug 07, 2017 3:14 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Ok so i went to use p100 mode and i was able to treat using 55V. I did few 24 minute long treatments and my skin was sweat free for one day but next day sweat came back. At the moment the only dry are ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Sat Aug 05, 2017 12:12 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Ok thanks i will follow Your advice as from my experience in past its a matter of time and patience and i hope i will get succes with Hidrex
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Sat Aug 05, 2017 11:23 am Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Yes it was 27mA as i used battery run device and it only showes mA. Yhen yes i stopped as i was advised to start treatment as soon as sweat comes back.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Aug 04, 2017 4:39 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	So i followed this plan and i was still sweating when finished it so on the end after two days i did two top up treatments using 27mA and then sweating just stopped and i was bone dry for more then we ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Aug 04, 2017 4:37 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	I used the device at 10 mA for 10 minutes for each polarity, if everything is alright (according to feeling) increase the strength of the therapy the next day to 12 mA for 12 minutes for each polarity ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Aug 04, 2017 4:35 pm Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	HIDREX PSP1000 Hands only P90 -------- For every treated area we need to know: - Initial Treatment was done every day? Yes - You feel the current as a slight tingling sensation? Yes - For ...
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Aug 04, 2017 8:47 am Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	My settings are p 90 always as high as possible with a voltage but machine never goes high enough i mean usually 36 volts its max. When you change to mA its not much about 21mA.
Topic: Succes before now waiting
Substancy Replies: 38 Views: 127740	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Aug 04, 2017 8:38 am Subject: Succes before now waiting
Substancy Replies: 38 Views: 127740	Hi. I have used a battery run device in a past and i could use it for two weeks then after one or two days of heavy sweating my hands would become bone dry for about one week. I used 24 minutes of tre ...
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Thu Aug 03, 2017 3:29 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	Hi did You receive device?
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Wed Jul 26, 2017 3:52 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	Hi i will have to wait with my success post as i am still trying my best to work out a perfect plan. I have periods of time when i am bone dry and i feel great but then sweat comes back and i have to ...
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Wed Jul 26, 2017 2:30 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	Hi i got a parcel with an unit. I checked it and they both same so looks like there was nothing wrong with it. I will send the unit back to You on friday if you dont mind as im working. I would like t ...
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Jul 21, 2017 1:00 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	Thank You very much and when i get it i will send You the one I have yes?
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Jul 21, 2017 12:55 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	I will definetly take a device as i am sure it works and i have done iontophoresis before (i have another machine). Just the issue with a buttons makes me think You should have a look at it. If You wi ...
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Fri Jul 21, 2017 11:02 am Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	Thanks I sent You pm
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Wed Jul 19, 2017 5:55 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	Hi thanks for a quick response. When i am adjusting volts i click once + or - then it goes up or down. Sometimes only when i press button nothing happens. For example: click 40V click 41V click 42V cl ...
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Wed Jul 19, 2017 4:28 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	I am using Hidrex psp1000.
Topic: Button sensitivity
Substancy Replies: 16 Views: 16727	Forum: Problems with the treatment - No / only little / partial success board Posted: Wed Jul 19, 2017 4:26 pm Subject: Button sensitivity
Substancy Replies: 16 Views: 16727	Hi all i have question about buttons on a device. Sometimes when i press them to adjust voltage or time it doesnt work. It takes another click to make it work. Is it a common thing or i have faulty de ...