| Author |
Message |
| DigHealth |
 Posted: Wed Jan 13, 2021 5:05 am Post subject: |
|
| It is as long as you know what is wrong. |
|
 |
| Felonea |
| Posted: Wed Dec 09, 2020 5:31 am Post subject: |
|
| Hurixtual wrote: | | It depends on the volt settings |
Yes I agree with him. |
|
|
| Hurixtual |
| Posted: Thu Nov 26, 2020 10:43 am Post subject: |
|
| It depends on the volt settings |
|
|
| Felonea |
| Posted: Thu Nov 05, 2020 5:04 am Post subject: |
|
| I have used Volvic water and have used bicarb and soda water! Nothing ever made a difference. |
|
|
| Guest |
| Posted: Tue Jun 30, 2020 2:20 pm Post subject: |
|
It is usually around 27v but sometimes the machine lets me run it at around 35, though, I realise this setting is too high for my skin, as I have burnt myself a few times. So, even if the machine will let me do 35v I crank it down a little to about 30-32.
I hope this helps. I'm kinda thinking if I have done exactly the same as the year before and it's not working...then it's not going to work! I have read about this happening to others as well. It is very unfortunate. |
|
|
| Guest |
| Posted: Mon Jun 29, 2020 2:14 pm Post subject: |
|
| Please send us the Volt settings.. |
|
|
| Guest |
| Posted: Mon Jun 29, 2020 2:09 pm Post subject: |
|
Well, first of all, I tried what worked the year before, which was 15 mins on 90 pulse then re-soak the pads and switch polarity and do another 15 mins. But unfortunately, it did not work this time around. I then tried other pulse settings but not going lower than 70. I increased the time to 10 mins each armpit and only switching polarity after 5 sessions, I have used Volvic water and have used bicarb and soda water! Nothing ever made a difference.
I'm going to giving Odaban another go, it may be really uncomfortable and makes me itch like made but at least it works. |
|
|
| support |
| Posted: Mon Jun 29, 2020 12:10 pm Post subject: |
|
| Good morning, can you tell us how often you conduct the treatments and at which current strength? |
|
|
| Tai-pan |
| Posted: Sat Jun 27, 2020 2:29 pm Post subject: If one machine does not work for you? |
|
Hi
Could someone please answer this for me, 'If one machine doesn't work for you is it worth trying another?'
I have used the Hidrex 1000 and the first year I used it it worked fantastically, I was over the moon! However, I've tried it several times since and it no longer works for me, I'm gutted. I have not moved, the water supply has not changed, I've tried Volvic water etc and followed numerous other suggestions, but nothing! It no longer works for me.
Should I buy a different make of machine, would this make any difference, or once iontophoresis stops working it STOPS WORKING! |
|
|